Crawford Interiors Home About Crawford Interiors Crawford Interiors Products Crawford Interiors Customer Serivce

 

http://www.crawfordinteriors.com

P.O. BOX 251288
Los Angeles, CA 90025-1288

Phone:  818-718-7676

 

Office Hours
Monday through Friday
9:00 am to 5:00 pm PST


You Can Fax This Form To:
818-718-9176

Name: Phone:

Brand:

Style:

Selected Options:

Room:

How Mounted Width Length
Wand
Cord
Door
Color/Style/Pattern

Inside / Outside

 

 

R / L

R / L

Y / N

 

Inside / Outside

 

 

R / L

R / L

Y / N

 

Inside / Outside

 

 

R / L

R / L

Y / N

 

Inside / Outside

 

 

R / L

R / L

Y / N

 

Inside / Outside

 

 

R / L

R / L

Y / N

 

Inside / Outside

 

 

R / L

R / L

Y / N

 

Inside / Outside

 

 

R / L

R / L

Y / N

 

Inside / Outside

 

 

R / L

R / L

Y / N

 

Inside / Outside

 

 

R / L

R / L

Y / N

 

Inside / Outside

 

 

R / L

R / L

Y / N

 

How to Measure

Inside Mount (IM) Installation
To find width:   Measure exact distance to the nearest 1/8" from inside surfaces of window frame at the top, middle and bottom, as shown, and use the narrowest width.  Do not make any width deductions.  Factory will make the appropriate deductions.
To find height :  Measure exact distance to the nearest 1/8" from inside surface at top of window to sill at the left, middle and right and use the longest height.  If you prefer blind not to touch sill, deduct 1/4 inch.  If there is no sill, measure to point where blind is to reach.
Use a metal measuring tape for best results... a cloth tape can stretch and cause inaccurate measurements!
Outside Mount (OM) Installation
To find width:  Measure exact distance to the nearest 1/8" between the outermost points where the blind is to be placed.  For optimum light control, this measurement should extend 3/4" beyond the window opening on each side (or 1 1/2" for the entire width).
To find height:  Measure exact distance to the nearest 1/8" form where the top of blind will be located on top of sill.  If there is no sill or if blind is to overlap window frame, measure to point blind is to reach.

 

home | company info | products | customer service | measuring instructions | contact us